Dual-Wavelength (980nm/1470nm) Laser Lipolysis Machine

Dual-Wavelength (980nm/1470nm) Laser Lipolysis Gains Prominence as a Minimally Invasive Body Contouring Solution**

**FOR IMMEDIATE RELEASE** — Laser lipolysis systems utilizing a dual-wavelength combination of 980nm and 1470nm are garnering renewed attention in the field of aesthetic medicine. Clinicians have long sought minimally invasive alternatives to traditional liposuction—procedures capable of both fat reduction and skin tightening.

This dual-wavelength approach leverages the complementary absorption characteristics of biological tissues: the 980nm wavelength primarily targets hemoglobin and lipids, facilitating hemostasis and fat emulsification; meanwhile, the 1470nm wavelength—which is absorbed by water approximately 40 times more effectively—concentrates thermal energy, leading to the liquefaction of localized fat and the contraction of collagen.

The scientific rationale for this dual-wavelength approach is supported by histological evidence.

A study conducted on a porcine model compared continuous-wave lasers at 980nm, 1370nm, and 1470nm. The findings revealed that treatment with a 1470nm continuous-wave laser induced more pronounced hemorrhage and cellular infiltration—hallmarks of the lipolytic process—than a pulsed 1440nm laser. Furthermore, collagen deposition was observed within the subcutaneous tissue, with levels increasing further after one month. The researchers noted that the extent of lipolysis depends on the wavelength, laser power, and energy density; subcutaneous laser irradiation stimulates collagen deposition within both the subcutaneous adipose tissue and the reticular dermis.

Mathematical modeling of laser lipolysis has further elucidated its underlying mechanisms.

Research based on an “optical-thermal damage” model indicates that when using a 980nm diode laser at a power of 6W—combined with cooled tumescent anesthesia and a cannula movement speed of 100 mm/s—the resulting skin surface temperature is comparable to that of a 1064nm Nd:YAG laser, reaching a maximum surface temperature of approximately 41°C. The model also indicates that temperatures in the deep reticular dermis can reach 48–50°C—a level sufficient to induce collagen remodeling, thereby achieving clinically visible skin tightening.

At the six-month post-procedure follow-up, the reduction in a patient’s fat volume was found to be positively correlated with the amount of energy delivered; typically, every 3,000 joules (J) of energy results in a reduction of 5 cubic centimeters (cm³) of fat.

endolaser lift


Post time: Nov-11-2026